[New(Measurement)]
Overview
Create a new spot color using the colorimeter.
Tips
- The Image Controller is required to use this function. For details, refer to What Is Color Centro?.
Tips
- The measuring method varies depending on colorimeters. For details, refer to the user's manual of the colorimeter.
- The created spot color can be adjusted later. For details, refer to [Manual Adjustment] or [Adjustment by Printing the Chart].
Specifications
Category | Print Workflow, Adjustment / Maintenance | ||
Location | Machine | - | |
Printer driver | - | ||
Application | Color Centro | ||
Required options | - | ||
Required items | - | ||
Setting items | [Color Name] | Enter a new spot color name. | |
[OK] | Applies the settings. | ||
[Cancel] | Closes the screen without saving the setting. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Color Centro - [Spot Color] - [File] - [New Table] - [New(Measurement)] | ||
Color Centro - [Spot Color] - [Table] - Select a spot color table. - [Open] - [New(Measurement)] | |||
Color Centro - [Spot Color] - [File] - [Table ...] - Select a spot color table. - [Open] - [New(Measurement)] | |||
Procedure
1
Click [Settings] - [Instrument], and select the connected colorimeter.
2
Click [New(Measurement)].
3
Set the colorimeter to the white standard tile, and click [OK].
4
Press the Measure button of the colorimeter to acquire the measurement value.
The acquired measurement value is displayed.
5
Enter [Color Name].
Up to 31 single-byte or double-byte characters can be entered.
Matching with the spot color name in image data is performed with "Prefix + Color name". Enter the name correctly, including whether there is a space.
Spot colors of the same name cannot be stored in a spot color table.
6
Click [OK].
The measured colors are added to the spot color list.
in the upper-right of a page, it turns into 
and is registered as a bookmark.