Name and Function of Each Department
No. | Name | Description |
|---|---|---|
1 | Reverse Automatic Document Feeder DF-713 (ADF) (optional) | A multi-page original can be fed and scanned one sheet at a time. |
2 | Sub power switch | Turns the machine power ON/OFF. |
3 | Service port (USB 2.0 Type A e 3) | Used when connecting external memory media (USB memory), keyboard, mouse, etc. Service port (USB 2.0 Type A e 3) supports low power devices only. Please provide an external supply of power for devices that require a large amount of power. |
4 | Touch panel | Displays the screens such as the [MACHINE] screen, and set up operations. Also, displays the operation method and method for handing problems. |
5 | Control panel | Press when operating and setting up. |
6 | Toner supply door | Open when replacing Toner bottle. |
7 | Toner supply door handle | Used when opening Toner supply door. |
8 | Tray 1 | Stores 500 sheets (80 g/m2 / 21 lb Bond). |
9 | Tray 2 | Stores 1000 sheets (80 g/m2 / 21 lb Bond). |
10 | Main body front door handle | Used when opening Front door. |
11 | Front door | Open when clearing a paper jam or when turning Main power switch ON/OFF. |
12 | Original Cover OC-511 (Original cover) (optional) | Open when loading documents in Original glass. |
13 | Working Table WT-511 (optional) | Documents, etc. can be placed here temporarily. |
14 | Multi Bypass Tray MB-509 (optional) | Used when printing on paper that is not set in the machine tray. Stores 250 sheets (80 g/m2 / 21 lb Bond). |
15 | Right side door | When clearing a paper jam, open the door and remove the paper. |
16 | Waste toner box replacement door | Open when replacing Waste toner box. |
17 | Output Tray OT-511 (optional) | Ejects the output paper without Offset. |
18 | Power cord | Supplies power to machine. |
19 | Network port (10BASE-T, 100BASE-TX, 1000BASE-T) | Connects an Ethernet cable to operate the machine and uses as a network scanner. |
20 | Service port (USB3.0/2.0 TypeA e 1) | Used when connecting external memory media (USB memory, USB-HDD), keyboard, mouse, Intelligent Media Sensor IM-101, etc. Service port (USB 3.0/2.0 TypeA e 1) supports low power devices only. Please provide an external supply of power for devices that require a large amount of power. |
21 | Image Controller connection port | Used when mounting Image Controller IC-609, Image Controller IC-607, Image Controller IC-317 or Image Controller IC-419. |
22 | Video Interface Kit connection port | Used when mounting Image Controller IC-609, Image Controller IC-607, or Video Interface Kit VI-515 (option). * When using a cable to connect Image Controller IC-317 or Image Controller IC-419 with machine, Video Interface Kit VI-515 (optional) is required. |
23 | Dust proof filter | Prevents dust infiltration with the Dust proof filter that is attached to the internal cooling fan. |
24 | Image Controller IC-609 / Image Controller IC-607 (options) | This system can be used as a printing system. |
25 | Machine Connection Port | Connect to the machine. |
26 | Service port (USB3.0/2.0 TypeA e 1) | Used when connecting external memory media (USB memory, USB-HDD), keyboard, mouse, etc. |
27 | Network port (10BASE-T, 100BASE-TX, 1000BASE-T) | Connects an Ethernet cable to operate the Image Controller, and uses as a network printer. |
28 | Service port (USB 2.0 Type B e 1) | Connects machine to computer using a USB cable and uses as a local printer (only when Local Interface Kit EK-612 is mounted). |
29 | Power switch | Power ON/OFF image controllers. |
30 | Lock release lever | When clearing a paper jam, push the lever to the back, open the guide downward, then remove the paper. Access Lock release lever from within the options on the left. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.