Connection of Color Centro and This System
Overview
Color Centro is an application used by connecting this system.
Connecting Color Centro to this system allows you to acquire information of this system and use each function. In addition, you can switch the destination if multiple devices are registered.
Using Color Centro, up to 20 computers can be connected to this system simultaneously.
Up to 50 devices can be connected to a single Color Centro.
Tips
- Before connecting, confirm that the connected Image Controller is ready for communication.
- The IP address and port number are required to connect Color Centro.
- Color Centro is a Java application. If a warning screen is displayed because the Java application is blocked by a firewall, allow a network communication by a Java application.
Setting of This System
The following information and settings are required to connect Color Centro to this system.
For details about each setting, refer to the appropriate link.
- [TCP/IP Settings]: Set the IP address on this system.
- [JSP Setting]: Set [JSP Setting] to [Enable(Without Password)].
- The defaults of [Port Number] are 30081 and 30082. In general use, the default setting does not need to be changed.
- JSP stands for JavaServer Pages.
- SSL or TLS: To use SSL or TLS, perform the following operation. When connecting Color Centro, select [Port Number] and [SSL/TLS].
- Registration of device certificate: [Device Certificate Setting]
- [TCP Socket Setting]: Select the [Use SSL/TLS] check box, and set [Port No.(SSL/TLS)].
in the upper-right of a page, it turns into 
and is registered as a bookmark.