Sending to an Unregistered FTP Server
Procedure
1
Perform Step 1 through Step 2 from Sending to a Registered FTP Server.
2
Press [Input Address].
You can select destinations by pressing the register name from the destination list. For details about selecting a registered destination, refer to Sending to a Registered FTP Server.
3
Press [Register Name], enter the register name, and press [OK].
For details about entering text, refer to Entering Text.
The register name can be specified using up to 24 single-byte characters (12 double-byte characters).
For [Reference Name], the same name as the register name is entered automatically. If you want to change the name, press [Reference Name] and enter text.
4
Press [Host Address] to enter the host address, and then press [OK].
For details about entering text, refer to Entering Text.
The host address can be up to 253 single-byte characters long.
5
Press [File Path], enter the file path and press [OK].
For details about entering text, refer to Entering Text.
The file path can be entered using up to 127 single-byte characters (63 double-byte characters).
6
Press [Login Name], enter the login name, and press [OK].
For details about entering text, refer to Entering Text.
The login name can be entered using up to 32 single-byte characters.
"anonymous" is entered in [Login Name] if [Anonymous] is pressed. An Anonymous FTP (an FTP for sharing files with a large number of unspecified users) can be used.
7
Press [Password] to enter the password, and then press [OK].
For details about entering text, refer to Entering Text.
Up to 32 single-byte characters can be used for the password.
The password you entered is displayed as "*".
8
If necessary, press [Port No.], enter the port number, and press [OK].
For details about entering text, refer to Entering Text.
You can set the port number used by the FTP server with a 5-digit number (00001 to 65535).
The port number is 21 by default. In general use, the port number does not need to be changed. Change only if the port was changed on the FTP server side.
Press [ON] to use Proxy.
9
Press [Scan Settings].
The [Scan Settings] screen is displayed.
Press [Register] to register the address you entered.
You can register up to 150 FTP destinations. For details about registering a destination, refer to [Scan Address Register].
10
Perform the steps on Sending to a Registered FTP Server from Step 5.
in the upper-right of a page, it turns into 
and is registered as a bookmark.