User's Guide

> Copy / Scan > Overview of the Scan Function > Scanning Preparation and Operation > Scan to FTP

Scan to FTP

An FTP server needs to be constructed.

Step 1
Checking and preparing the network
You should be connected to a general TCP/IP network environment
There should be an FTP server
Step 2
Required system settings
[TCP/IP Settings]
[FTP TX Settings]
Step 3
Scan operations (Select a destination and scan the original)
1. Select [FTP] on the [SCAN] screen
2. Select a destination FTP server (the destination needs to be registered in advance)
3. Set the scanning conditions in [Scan Settings]
4. Load the original and scan
Step 4
Operations on the receiving end (computer)
Import the data stored on the FTP server

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.