User's Guide

> Copy / Scan > Pre-Checks and Preparation for Scanning > Scan to SMB > Configuring the System

Configuring the System

The following settings must be configured in advance.

Setting

Description

Reference

[TCP/IP Settings]

Configure the settings to allow communication using a TCP/IP environment.

Use this setting item to set the system's IP address.

[TCP/IP Settings]

[Client Settings]

Configure the settings to allow use of the SMB transmission function.

[SMB Settings] - [Client Settings]

[WINS/NetBIOS Settings]

Configure various settings for when using a WINS server.

[SMB Settings] - [WINS/NetBIOS Settings]

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.