Storage Specifications
Scanned data is stored directly (root) in the USB flash drive and a file name is given as shown below.
When manually entered:
Entered file name +_+5-digit sequence number (c)+. Extension
(Example: test_00001.jpg)
When automatically assigned (if you do not enter a file name):
Character string (a) + 4-digit date + 4-digit time + 3-digit sequence number (b) + _ + 5-digit sequence number (c) + .extension
(Example: AAA01011450000001_00001.jpg)
Added Items | Description |
|---|---|
Character String (a) | This is a character string set in advance with [Controller]. |
3-digit sequence number (b) | Represents the job separator. Numbered from 0 in sequence when different data is scanned at the same time. |
5-digit sequence number (c) | Represents the order of the data. Numbered from 1 in sequence when scanned in split format. |
Tips
- Password-protected or encrypted USB flash drives cannot be used.
- Scan data is stored in the root of the USB flash drive. The storage destination folder cannot be specified.
- If you have more than one USB flash drive connected, the scan data is stored in the last inserted USB flash drive.
- If the file name you entered manually is the same as a file name in the USB flash drive, the data is not stored and the function is canceled. At this time, [Error] is displayed in the Send History.
- Even when an external USB-enabled HDD is connected, save specifications (such as storage folders or file names) that are the same as those of the USB flash drive are used.
in the upper-right of a page, it turns into 
and is registered as a bookmark.