[SSL Setting]
Overview
Configure settings for SSL encryption communication that is used during communication with OpenAPI.
NOTICE
- The following settings are required to use this function.
- Register certificate in system
- Set [Mode using SSL/TLS] of [SSL Setting] to [Admin. Mode] or [Admin. Mode and User Mode].
Reference
- For details on the certificate, refer to [Device Certificate Setting].
- For details about [SSL Setting], refer to [SSL Setting].
Specifications
Category | Network / Security, Device Management | ||
Location | Machine | Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | -[Non-SSL Only] | Allows communication only in the case SSL communication settings are disabled. | |
[SSL Only] | Allows communication only in the case SSL communication settings are enabled. | ||
[SSL/Non-SSL] | Allows communication when SSL communication settings are enabled and disabled. | ||
Remarks | -: Default | ||
Reference | - | ||
Screen access | Control panel - Utility/Counter - [Administrator Setting] - [System Connection] - [Cloud Eye Setting] - [SSL/Port Settings] | ||
in the upper-right of a page, it turns into 
and is registered as a bookmark.