Description of the Power Save Function
This system provides a number of power-saving functions to reduce power consumption. The Power Save function is one of these power-saving functions.
This system’s power consumption is saved by turning off the display of the Touch panel and the LED lamps on the Control panel.
The Power Save function has 2 types: Low Power and Shut OFF.
Low Power: The Power Save LED lights up, the Start LED changes to orange, and the Power LED remains blue.
Shut OFF: All the LEDs other than the Power Save LED and the Power LED on the Control panel are turned off. The Power Save LED lights up, and the Power LED lights up blue as it is. This mode further reduces power consumption to a greater degree than Low Power.
The following 2 methods of using the Power Save function are available.
- Hold down Power Save on the Control panel for 1 or more seconds
For details, refer to [Power Save Function]. - Set the time required until this system switches to the Power Save mode
For details, refer to [Timer Setting].
You can also select the auto wakeup condition that activates this system when a print job is received during shutoff.
Tips
- Low Power: When the jam position screen or duplex output screen is displayed, the Touch panel display is not turned off.
- Shut OFF: If the system is in the Shut OFF mode for an extended period of time, it may take some time to warm up when it is restarted.
in the upper-right of a page, it turns into 
and is registered as a bookmark.