[CD-Mag. Adjustment]
Overview
Adjust the printing magnification in the crosswise direction when printing.
You can adjust so that the test pattern of a chart is output with the correct magnification.
Specifications
Category | Adjustment / Maintenance | ||
Location | Machine | Touch Panel, Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | [Side1] | Adjusts the image lead-edge position in the feed direction of the front side. | |
[Side2] | Adjusts the image lead-edge position in the feed direction of the back side. | ||
Adjustment target selection key | Select the adjustment target. To display, press [Side2]. | ||
Keypad | Used to enter numeric values. | ||
[Clear] | Returns the entered numeric value to "0". | ||
[Set] | Sets the numeric value entered using the on-screen keypad or the Keypad of the Control panel to the selected setting item. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Adjustment] - [Machine Adjustment] - [Printer Adjustment] - [CD-Mag. Adjustment] | ||
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Printer Adjustment] - [CD-Mag. Adjustment] | |||
Procedure (When Adjusting the Front Side)
1
Select [Side1].
2
Press [Print Mode].
3
Press [1->1].
4
Load A3 w or 11 e 17 w paper into any paper tray, and select that paper tray.
5
Press Start on the Control panel.
A chart is output.
For details about the 
mark that is printed on the front side of the chart, refer to About Charts.
6
Measure the magnification in the direction perpendicular to the paper feed direction using the scale.
Standard value: ^ 0.5% or less, within 1 mm for 190 mm
7
If any adjustments are required, press [Exit PrintMode] to return to the setting screen.
8
Use the on-screen keypad or the Keypad of the Control panel to enter the numeric value.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-10~+10 1step = 0.05%]
9
Repeat steps 2 to 8 until the desired result is obtained.
Procedure (When Adjusting the Back Side)
1
Select [Side2].
2
Press the adjustment target selection key to adjust.
3
Press [Print Mode].
4
Press [1->2].
5
Load A3 w or 11 e 17 w paper in the paper tray for adjustment selected in step 2, and select that paper tray.
6
Press Start on the Control panel.
A chart is output.
The side that does not have the mark is the back side.
7
Measure the magnification in the direction perpendicular to the paper feed direction of the back side using the scale.
Standard value: ^ 0.5% or less, within 1 mm for 190 mm
8
If any adjustments are required, press [Exit PrintMode] to return to the setting screen.
9
Use the on-screen keypad or the Keypad of the Control panel to enter the numeric value.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-10~0 1step = 0.05%]
10
Repeat steps 3 to 9 until the desired result is obtained.
in the upper-right of a page, it turns into 
and is registered as a bookmark.