Administrator Setting | [Erase Operation Setting]

[Erase Operation Setting]

Configure detailed settings for when [NoImageAreaErase] is selected using [Application] provided on [COPY] and [SCAN] screens.

Tips

If [Auto] is selected, a margin may not be erased correctly depending on the original. In such a case, manually select [Erase Mode] and [Original Density].
If the original is detected as a smaller one than the actual, set [Original Density] to [Dark] or [Dark+].
If the original is detected as a larger one than the actual, set [Original Density] to [Light] or [Light+].

Category		Copy / Scan
Location	Machine	Control Panel
	Printer driver	-
	Application	-
Required options		-
Required items		-
Setting items		-[Erase Mode/Orig. Density]	[Auto]	Automatically sets [Erase Mode] and [Original Density].
		[Erase Mode]	-[Oblique Erase]	Sets area as document area without including shadow of the paper and erases the outside area.
			[Rectangle Erase]	Sets area as document area, including shadow of the paper and erases the outside area.
		[Original Density]	-[Dark+]	Selects [Original Density] from 5 stages, if [Oblique Erase] or [Rectangle Erase] are selected.
			[Dark]
			[Normal]
			[Light]
			[Light+]
Remarks		-: Default
Reference		-
Screen access		Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Erase Correction] - [Erase Operation Setting]

Select [Erase Mode] and [Original Density].

To automatically set [Erase Mode] and [Original Density], select [Auto].

Press [OK].