[Gripper Operation Adj.]
Overview
Adjust the timing to hold the rear edge of the paper with the gripper.
Specifications
Category | Adjustment / Maintenance | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required items | Output Tray OT-512 | ||
Setting items | [Offset for All Weight] | Adjusts the timing for all sizes. | |
Paper weight selection key | Selects the paper weight to adjust. | ||
[+] / [,] | Switches the paper size page. | ||
Keypad | Used to enter numeric values. | ||
[Clear] | Returns the entered numeric value to "0". | ||
[Set] | Sets the numeric value entered using the keypad to the selected setting item. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Main) Adj.] - [Gripper Operation Adj.] | ||
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Main) Adj.] - [Gripper Operation Adj.] | |||
Procedure
1
Press the selection key of the paper weight to adjust.
2
Use the on-screen keypad to enter the numeric value.
To change [Current Data], use [+ / -] to select the plus or minus of the numeric value, and press [Set].
Timing to hold the rear edge of the paper: (-) Faster (+) Slow down
[Adj. Range:-20~+20 1step = 1msec]
in the upper-right of a page, it turns into 
and is registered as a bookmark.