[Ready]

This system is normal.

[Service Call]

A service call has occurred in this system or the Image Controller.

[Cover Open]

One of the doors of this system is open.

[Paper Jam]

A paper jam has occurred in a location other than the ADF. Follow the instructions shown on the Touch panel of this system to clear the paper jam.

[ADF Cover Open]

ADF is opened.

[ADF Jam]

A paper jam has occurred in the ADF.

[Output Tray Full]

One of the output trays is full.

[Toner Empty]

One of the toner cartridges is empty.

[Humidifier Tank Empty]

The humidifier tank is empty.

[No Paper]

Replenish paper for the job currently being printed.

[Key Counter Unset]

The key counter is not set.

[Hold Job Full]

The [Hold] job list is full.

[Waste Toner Full]

The waste toner box is full.

[Punch Dust Full]

The punch-hole scrap box is full.

[Staple Dust Full]

The staple scrap box is full.

[Staple Empty]

The staple cartridge is empty.

[HDD Near Full]

There is an insufficient amount of available space on the HDD.

[HDD Folder Full]

The HDD folder is full.

[Secure Box Full]

The Secure box is full.

[Toner Near Empty]

There is an insufficient amount of toner remaining in one of the toner cartridges.

[Waste Toner Near Full]

The capacity of the Waste toner box is insufficient.

[Maintenance Required]

The life limit of the consumables has been exceeded.

[Low Power Mode]

This system is in Low power mode.

[Shut OFF Mode]

This system is in Shut-Off mode.

[Warming Up]

This system is in Warming-Up mode.

[Now Adjusting]

This system is adjusting.

[Error]

A print job has stopped for some reason.

[Print Paused]

A print job has been temporarily stopped by the user.

[Print Hold by Warning]

A print job has been temporarily stopped for some reason.

[Printing]

A print job is currently being printed.

[Canceling]

A print job is currently being canceled.

Indicates a warning.

Indicates an error.