User's Guide

> Startup Guide > Replenishing and Replacing Consumables > Replenishment of Humidifier Tank Water

Replenishment of Humidifier Tank Water

Overview
Procedure

Overview

If the water in the Humidifier HM-103 (option) humidifier tank mounted on Relay Unit RU-518m runs out, you cannot adjust curls via humidification. In this case, the following message is displayed in the on-screen information display area.

[Humidifier relay unit is out of water Please supply the tank with water]

The humidifier tank display in the [Consumable and Scrap Indicators] display lights up red and the text color changes to yellow.

NOTICE
  • Do not add dirty water, well water, or water that has passed through a water purifier to the humidifier.
    Doing so can result in bacteria propagating within the tank. Only use sterilized tap water, mineral water or alkaline ionized water.

Procedure

1
Press [Humidifier Tank] in [Consumable and Scrap Indicators].
2
Press [,] or [+] to display the procedure and then perform the operation accordingly.

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.