Loading Tab Paper Into the Multi Bypass Tray Unit MB-507

Load tab paper into the Multi Bypass Tray Unit MB-507.

Example: Insert 3 sheets of tab paper into 1 print set

Tray Loading Direction	How to Stack the Tab Paper	Print Set

Tips

• There is a possibility that sheets of paper may stick together due to punch holes if tab paper with punch holes is used. To prevent multiple sheets being fed at once, flick through the stack by hand before loading the paper. For details about how to separate paper, refer to Managing Paper.
• When loading tab paper into any tray, change the size setting of the tray to tab paper in Paper Setting. For details, refer to [Change Set].

1

Open the Bypass tray.

2

Set the Bypass tray - [Paper Size] to [Tab Paper] through [Paper Setting].

3

Load the tab paper to the Bypass tray.

Be careful not to exceed the maximum stack height lines displayed on the Bypass tray - Side guides when loading the paper.

4

Place the Bypass tray - Side guides in line with the tab paper.