User's Guide

> Startup Guide > Replenishing and Replacing Consumables > Replenishing Staples

Replenishing Staples

Overview
Procedure

Overview

If the staples in the finisher run out, the following messages is displayed in the on-screen information display area.

The [Consumable and Scrap Indicators] staple display lights up red and the text color changes to yellow.

Option

Message

Finisher FS-532

[Pull out staple finisher stacker then, set staples in stapler]

[Pull out staple finisher saddle unit then, set staples in stapler]

Check the message and replenish the relevant stapler with staples. 

Procedure

1
Press [Staple Cartridge] in [Consumable and Scrap Indicators].
2
Press [,] or [+] to display the procedure and then perform the operation accordingly.

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.