Category

Network / Security

Location

Machine

-

Printer driver

-

Application

Web Connection

Required options

-

Required items

-

Setting items

[Friendly Name]*

Sets the name of this system on the Web service.

Up to 62 single-byte characters can be entered.

[SSL Setting]

[ON]

Specify whether to use SSL.

This function is displayed when the certificate is installed.

[OFF]

[Publication Service]

[Enable]

Enables Publication Service.

Select this item when NetBIOS is disabled or Only IPv6 is used for communication.

[Disable]

Disables Publication Service.

[Certificate Verification Level Settings]

[Validity Period]

[Confirm]

Checks whether the certificate's expiration date is valid.

[Do Not Confirm]

Does not check whether the certificate's expiration date is valid.

[Key Usage]

[Confirm]

Checks whether the certificate is used according to the intended usage approved by the issuer of the certificate.

[Do Not Confirm]

Does not check whether the certificate is being used according to the usage approved by the issuer of the certificate.

[Chain]

[Confirm]

Checks whether there are any problems in the certificate chain (certificate path). To confirm the chain, refer to the external certificate managed in the system.

[Do Not Confirm]

Does not check whether there are any problems in the certificate chain (certificate path).

[Expiration Date Confirmation]

[Confirm]

Checks whether the certificate has expired.

[Do Not Confirm]

Does not check whether the certificate is lost.

[OK]

Applies the setting.

[Cancel]

Cancels the setting.

Remarks

If you have changed the setting marked by an asterisk ("*"), turn the system power off and back on again.

Reference

-

Screen access

Web Connection - [Network] - [DPWS Settings] - [DPWS Common Settings]