Configure various settings related to IPP (Internet Printing Protocol).
Category | Network / Security | |||
Location | Machine | - | ||
Printer driver | - | |||
Application | Web Connection | |||
Required options | - | |||
Required items | - | |||
Setting items | [IPP Setting] | [ON] | Uses IPP. | |
[OFF] | Does not use IPP. | |||
[SSL Setting] | [Non-SSL Only] | Allows communication only in the case SSL communication settings are disabled. | ||
[SSL Only] | Allows communication only in the case SSL communication settings are enabled. | |||
[SSL/Non-SSL] | Allows communication when SSL communication settings are enabled and disabled. | |||
[Accept IPP job] | [ON] | Uses IPP printing. | ||
[OFF] | Does not use IPP printing. | |||
[Printer Name] | Sets the printer name of the machine. Up to 127 single-byte characters can be entered. | |||
[Printer Location] | Enter the location to place the machine. Up to 127 single-byte characters can be entered. | |||
[Printer Information] | Enter the printer information of the machine. Up to 127 single-byte characters can be entered. | |||
[Printer URI] | Displays the URI of the printer that enables IPP printing. This setting cannot be changed. | |||
[Support Operation] | [Print Job] | Sets the item that allows IPP operation. Allows the operation of the items of which the check box is selected. | ||
[Valid Job] | ||||
[Cancel Job] | ||||
[Open Job Attributes] | ||||
[Open Job] | ||||
[Open Printer Attributes] | ||||
[IPP Authentication Setting] | Uses IPP authentication. To set [Authentication Method], select this check box. | |||
[Authentication Method] | [requesting-user-name] | Select the authentication method. These options can be selected from the menu list. | ||
[basic] | ||||
[digest] | ||||
[User Name] | Sets the user name to use IPP authentication. To specify the name, set [Authentication Method] to an item other than [requesting-user-name]. | |||
[Password] | Sets the password to use IPP authentication. To change the password, select the [Password is changed.] check box. To specify the name, set [Authentication Method] to an item other than [requesting-user-name]. | |||
[realm] | Sets the area to use IPP authentication. | |||
[OK] | Applies the setting. | |||
[Cancel] | Cancels the setting. | |||
Remarks | - | |||
Reference | - | |||
Screen access | Web Connection - [Network] - [IPP Setting] |