[Change Unit]
Overview
Switch the display unit of the work process item. The unit is switched each time the key is pressed.
You can also change the range to display the unit axis of the work process item.
NOTICE
- The following setting is required to use this function.
- Set [Enhanced Security Mode] to [OFF].
Tips
- You can set the default for the work process item. For details, refer to [Schedule Cross Axis Unit (Default)].
Reference
- For details about [Enhanced Security Mode], refer to [Enhanced Security Mode].
Specifications
Category | Print Workflow | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | [Change Unit] | Each time this key is pressed, the display unit of the work process item is switched to one of the following units. [Time Frame(m)]: Time required for printing [Sheet Volume]: Number of remaining prints [Timetable]: Scheduled time to finish printing | |
| Changes the display scale of the unit axis of the work process axis item. [Time Frame(m)]: Display scale setting range: 30 min. to 24 hours [Sheet Volume]: Display scale setting range: 1,500 sheets to 70,000 sheets [Timetable]: Display scale setting range: After 30 min. to after 24 hours | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [JOB LIST] - [Schedule] | ||
/
in the upper-right of a page, it turns into 
and is registered as a bookmark.