[Output] Screen
Overview
Print the selected [Secure Job].
You can select the number of sets and the output method. After output, [Secure Job] is deleted automatically.
Specifications
Category | Print Workflow | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | Set number indicator | Displays the number of output sets. | |
[Normal] | Prints the number of copies that is set in [Secure Job]. | ||
[Proof] | Only 1 copy is printed. This option is used to confirm the printing result. | ||
[Proof(1st)] | Prints only the top page of a copy. When multiple copies are specified, only the top page is printed. | ||
[Wait] | Stores a job in [Reserved Job]. The job is placed in the output stop state. To restart printing, press Start on the Control panel. | ||
[Cancel] | Moves to the previous screen without saving the settings. | ||
[OK] | Saves the setting, and makes prints. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [JOB LIST] - [Secure Job] - [Output] | ||
Procedure
1
Enter the number of sets using the Keypad of the Control panel.
Range: 1 to 9,999
If multiple jobs are selected, the set number indicator is displayed as "- - - -". Printing does not start unless the number of output sets is entered. The specified number of sets is applied to all the selected [Secure Job].
2
Select an output method.
3
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.