Loading Tab Paper Into the Main body tray
Overview
Loading tab paper to the Main body tray.
E.g.: Insert three sheets of tab paper to one print set
Tray Loading Direction | How to Stack the Tab Paper | Print Set |
|---|---|---|
 |  |  |
E.g.: Insert three sheets of tab paper to three print sets (total 9 sheets)
Tray Loading Direction | How to Stack the Tab Paper | Print Set |
|---|---|---|
 |  |  |
Tips
- There is a possibility that the papers may stick together due to punch holes causing if tab paper with punch holes are used. To prevent multiple sheets being fed at once, flick through the stack by hand before loading the paper. Refer to Managing Paper for more details on how to properly handle the papers.
- Change the tray size settings to the tab paper settings during paper settings if you want to load tab papers into any tray. For details, refer to [Paper Size].
Procedure
1
Pull out the tray.
Pull out the tray for which tab paper is set.
2
Open the Feed roller.
3
Load the tab paper.
NOTICE
- Exercise care not to exceed the maximum stack height lines displayed on the tray Side guides when loading the paper.
4
Place the guide plate against the tab paper.
Load the tab paper so that it is aligned with the Feed roller side of the tray.
While holding down the Side guide lock release lever, place the Side guides in the front side against the tab paper, and place the Rear guide plate against the paper.
NOTICE
- Make sure that the Side guides and Rear guide plate are placed firmly against the paper. If there is a gap between the guide and the paper, the machine will not be able to properly detect the correct paper size, which may lead to a failure in the paper feeding device.
5
Firmly push the tray all the way in.
in the upper-right of a page, it turns into 
and is registered as a bookmark.