[AutoMeasure] - [Before Job]
Overview
Set [Both Sides Adj. Before Job] for each paper tray.
When the paper tray specified in [ON] is opened/closed for paper replacement or replenishment, a chart is automatically output to make Both Sides Adjustment before a job is printed.
NOTICE
- The following setting is required to use this function.
- Set [Both Sides Adj. Before Job] of [Adjustment] to [ON].
Tips
- To output a chart, you can select either Simplex or Duplex.
Reference
- For details about [Both Sides Adj. Before Job], refer to [Periodical Both Sides Adj.].
Specifications
Category | Copy / Scan | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | Intelligent Quality Optimizer IQ-501 | ||
Required items | - | ||
Setting items | [ON] | Performs [Before Job]. | |
[OFF] | Does not perform [Before Job]. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Paper Setting] - [Change Set] - [Both Sides Adj.] - [AutoMeasure] | ||
Touch panel - [MACHINE] - [Paper Setting] - [New Setting] - [Both Sides Adj.] - [AutoMeasure] | |||
Touch panel - [MACHINE] - [Both Sides] - [AutoMeasure] | |||
Touch panel - [MACHINE] - [Reg./Del.PaperSet.] - [Add/Edit] - [Both Sides Adj.] - [AutoMeasure] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.