[Auto Inspection Level Detailed Setting]
Overview
Adjust the inspection standard for automatic inspection (automatic inspection level).
You can set the automatic inspection level for each paper tray.
Tips
Even if [Enable] is selected, the operation is the same as [Disable] in the following cases.
- When automatic inspection is performed with the automatic inspection level set to "0"
Tips
When there are multiple paper trays to be used when executing a job
- Paper tray set to [Enable]: Automatic inspection is performed at the level set for each paper tray.
- Paper tray set to [Disable]: Automatic inspection is performed at the level set by [Common Setting] or [Automatic Inspection Level Setting] of [IQ Function Setting].
Reference
- For details about the automatic inspection level, refer to What Is [Automatic Inspection Level Setting]?.
- For details about [Common Setting] settings, refer to [Automatic Inspection Level Setting].
- For details about [IQ Function Setting] settings, refer to [Automatic Inspection Level Setting].
Specifications
Category | Print Workflow, Copy / Scan, Adjustment / Maintenance | ||||
Location | Machine | Touch Panel | |||
Printer driver | - | ||||
Application | - | ||||
Required options | All the following optional devices are required. Intelligent Quality Optimizer IQ-501 Auto Inspection Unit UK-301 Relay Unit RU-702 Video Interface Kit VI-514 Video Interface Kit VI-515 | ||||
Required items | - | ||||
Setting items | [Enable] | Sets the automatic inspection level for each paper tray. The paper loaded in the specified paper tray is automatically inspected at the selected level. | |||
[Disable] | Disables the automatic inspection level specified for each paper tray. The automatic inspection level specified in [Common Setting] or [IQ Function Setting] is enabled. | ||||
[Detail Setting] | Inspection level selection key | [Essential] | Sets the inspection level when [Essential] is selected. | ||
[Standard] | Sets the inspection level when [Standard] is selected. | ||||
[Premium] | Sets the inspection level when [Premium] is selected. | ||||
[Custom] | Sets the inspection level when [Custom] is selected. | ||||
[Cancel] | Moves to the previous screen without saving the settings. | ||||
[OK] | Saves the settings and moves to the previous screen. | ||||
[Reset] | Resets the numeric value you are currently entering. | ||||
Keypad | Used to enter the compensation value. | ||||
Remarks | The streak stain and spot inspection functions are optional. These functions are not displayed by default. To use this setting, please contact your service representative. | ||||
Reference | - | ||||
Screen access | Touch panel - [MACHINE] - [Paper Setting] - [Change Set] - [Expert Adj.] - [Auto Inspection Level Detailed Setting] | ||||
Touch panel - [MACHINE] - [Paper Setting] - [New Setting] - [Expert Adj.] - [Auto Inspection Level Detailed Setting] | |||||
Touch panel - [MACHINE] - [Reg./Del.PaperSet.] - [Add/Edit] - [Paper Type] - [Expert Adj.] - [Auto Inspection Level Detailed Setting] | |||||
Procedure
1
Press the key to select the inspection level to be adjusted.
This section describes an example case in which the [Detection Level] of [Stain] is selected.
2
Use the on-screen keypad to enter the adjustment value.
3
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.