User's Guide

Bookmarks

> Paper Setting > [TU Offset Profile Management] > [Add/Edit] > [1e1-1e3/1e1-3e3 Mode]

[1e1-1e3/1e1-3e3 Mode]

Overview

Set [1e1-1e3/1e1-3e3 Mode].

You can adjust the trim position, slit position, crease position, and perforation position.

Specifications

Category		Print Workflow, Copy / Scan, Adjustment / Maintenance
Location	Machine	Touch Panel
	Printer driver	-
	Application	-
Required options		The following option is required depending on setting items. [Gutter Slit Position]: Trimmer Unit TU-510 with Trimmer Unit TU-504 mounted [2-Side Slit Position], [CD Trim Position]: Trimmer Unit TU-510 [Crease (Up Convex) Position], [Crease(Down Convex) Position]: Trimmer Unit TU-510 with Creaser Unit CR-102 or Creaser Unit CR-103 mouted. [FD Perforation Position]: Trimmer Unit TU-510 with Perforation Unit PE-101 mounted
Required items		-
Setting items		[2-Side Slit Position]	Adjust the 2-side slit position in the paper feed direction. For details, refer to [2-Side Slit Position].
		[CD Trim Position]	Adjust the trim position in the crosswise direction. For details, refer to [CD Trim Position].
		[Gutter Slit Position]	Adjust the trim position in the crosswise direction. For details, refer to [Gutter Slit Position].
		[Crease (Up Convex) Position]	Adjust the crease (up convex) position. For details, refer to [Crease (Up Convex) Position].
		[Crease(Down Convex) Position]	Adjust the crease (lower convex) position. For details, refer to [Crease(Down Convex) Position].
		[FD Perforation Position]	Adjust the perforation position in the feed direction. For details, refer to [FD Perforation Position].
Remarks		-
Reference		-
Screen access		Touch panel - [MACHINE] - [Paper Setting] - [Change Set] - [TU OffsetProfile] - [TU Offset Profile Management] - [Trimmer Unit Offset Adjustment]
		Touch panel - [MACHINE] - [Paper Setting] - [New Setting] - [TU OffsetProfile] - [TU Offset Profile Management] - [Trimmer Unit Offset Adjustment]
		Touch panel - [MACHINE] - [Reg./Del.PaperSet.] - [Add/Edit] - [TU OffsetProfile] - [TU Offset Profile Management] - [Trimmer Unit Offset Adjustment]

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.