User's Guide

> Startup Guide > Basic Operating Method > How to Access the Application > Web Connection (Image Controller)

Web Connection (Image Controller)

Overview
Procedure

Overview

This section describes the method for accessing Web Connection of the Image Controller.

Procedure

Access the application by entering your IP address into your browser.
1
Launch your browser.
2
Enter the IP address in the URL field as shown below, and press [Enter].

http://<IP address of the Image Controller>/wcd/top.xml

(E.g.) If the IP address of the Image Controller is 192.168.1.20:

http://192.168.1.20/wcd/top.xml

If using IPv6, access the application by enclosing the IPv6 address in square brackets ([ ]).

http://<IPv6 address of the Image Controller>/wcd/top.xml

(E.g.) If the IPv6 address of the Image Controller is fe80::220:6bff:fe10:2f16:

http://[fe80::220:6bff:fe10:2f16]/wcd/top.xml

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.