[HDD Encryption Setting]

With this setting, all data stored on the HDD can be encrypted. This a suitable option for protecting your data in case the HDD is stolen.

NOTICE

• This setting can only be changed when the jobs (hold jobs, HDD store jobs, secure jobs) are not stored on the HDD.
• You can delete jobs from following locations. Basically, the user is the one who performs the deletion.
  Hold job: [Hold Job]
  HDD hold jobs:[Hold Job]
  Secure jobs: [Secure Job]
• Use [HDD Management Setting] if it is necessary for the administrator to perform the deletion. For details, refer to [HDD Management Setting].

Tips

• Uses AES encryption (block length: 128 bit, key length: 255 bit).
• There are some restrictions when scanning. For details, refer to Encrypting Scan Data.

1

Press Utility/Counter, and then press in order of [Administrator Setting] - [Security Setting] - [HDD Management Setting] - [HDD Encryption Setting].

2

Select [ON].

3

Press [Current Password] and enter the current encryption password.

4

Press [New Password] and enter the new password.

Setting Range: 8 to 32 single-byte symbols or alphanumeric characters

5

Press [Input Confirmation] and reenter the new password.

6

Press [OK].