User's Guide

> Network / Security > Connecting to a Network > Network Settings > [IPv4 Settings]

[IPv4 Settings]

Overview
Procedure

Overview

Configure settings for using the system while connected in a TCP/IP environment.

In particular, you can check and configure IP addresses, set up DNS servers, and configure IPSec if necessary.

Use IPv4 when you want to set an IP address "xxx.xxx.xxx.xxx" on the system.

NOTICE
  • Do not set the following combination for IPv4.
    IP address: 203.0.113.1

Procedure

1
Press Utility/Counter, and then press in order of [Administrator Setting] - [Network Setting] - [NIC Settings].
2
Press [TCP/IP Settings].
3
Press [ON].
4
Press [IPv4 Settings] and then select [Manual Input] or [Auto Input].

[Manual Input]: Manually configure the IP address (if required, you can also configure the subnet mask and default gateway).

[Auto Input]: The IP address is assigned automatically. As such, you do not need to manually set the IP address.

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.