User's Guide

> Troubleshooting > Issues During Use of Controller/Application > FATAL: Assertion Failed Error Occurs When Using Command WorkStation for Printing After Configuring Imposition Settings With Fiery Impose.

FATAL: Assertion Failed Error Occurs When Using Command WorkStation for Printing After Configuring Imposition Settings With Fiery Impose.

Cause

The cause for this issue is on the system end.

Option

Fiery Color Server

Work Time

5 minutes or less

Overview

This issue can be prevented by limiting memory usage.

Precautions

-

Procedure

The example procedure below uses Fiery Color Server.

1. Select the target job in Command WorkStation, right-click, and then open [Properties].

2. In the [VDP] tab, set the [Cache PDF and PS objects] check box to OFF.

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.