Cause

If a profile is used when performing RIP processing on the controller, instead of just K, the gray for CMY is also replaced, and counted as color.

Option

KMI controller

Work Time

5 minutes or less

Overview

Perform processing on the PS interpreter side without using a profile.

Precautions

As color conversation is performed without use of a profile, there is a chance the quality may be reduced.

Procedure

The example procedure below uses the AccurioPress C4080/AccurioPress C4070 PS Driver.

1. Select [Printing Preference] in [Properties].

2. Select [Manual Settings] for the color conversion settings under the [Color Management] tab.

3. Set [RGB Conversion] to [Off].

Work Time

5 minutes or less

Overview

Process by specifying the RGB profile on the controller side rather than using an RGB embedded profile.

Precautions

The color reproducibility changes.

Procedure

The procedure for specifying an RGB profile on the controller for processing is as detailed below.

1. Open [Printing Preference] for PS Plug-in Driver, set the [Use Manual Settings] radio button to ON in the [Color Management] tab, and then uncheck the [Use Embedded Spot Colors] check box in the [Optional Settings] tab.

2. Select [Preferences] in the printing dialog box, and check the [Let printer determine colors] check box.