User's Guide

> Troubleshooting > Issues During Use of Controller/Application > Next Job Is Not Received When Printing Multiple Jobs, Even After Sending it to the Controller

Next Job Is Not Received When Printing Multiple Jobs, Even After Sending it to the Controller

Cause

The settings are not configured to receive jobs during the RIP process.

Option

Fiery Color Server

Work Time

5 minutes or less

Overview

This can be resolved by changing the settings.

Precautions

-

Procedure

The example procedure below uses Fiery Color Server.

1. Launch Command WorkStation, and select [Server], and then [Device Center].

2. Launch [Configure].

3. Open [Job Management].

4. Set the [RIP while Receive] check box to [ON].

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.