User Settings | [Original Density Shift]

[Original Density Shift]

Adjust the density shift amount for each mode ([Text/Photo(Print)], etc.) of [Type].

Tips

Set the extent to adjust density for each original when each mode such as [Text/Photo(Print)] or [Photo(Print)] is selected in [Type]. This function is available when the expected effects are not obtained in the selected mode.

Category		Copy / Scan
Location	Machine	Control Panel
	Printer driver	-
	Application	-
Required options		-
Required items		-
Setting items		[Text/Photo(Print)]	Selects the adjustment target. Adjusting to the plus (+) side sets the original density higher than the default. Adjusting to the minus (-) side sets the original density lower than the default.
		[Text/Photo(Photo)]
		[Photo(Print)]
		[Photo(Photo)]
		[Text]
		[Dot Matrix]
		[Map]
		[Set]	Sets the numeric value entered using the on-screen keypad or the Keypad of the Control panel to [Current Data].
		Keypad	Used to enter numeric values.
		[+ / -]	Sets the plus or minus of the numeric value.
		[Clear]	Returns the entered numeric value to "0".
		[Return]	Moves to the previous screen.
Remarks		-
Reference		-
Screen access		Control panel - Utility/Counter - [User Setting] - [Image Quality Setting] - [Original Density Shift]

Press the target key ([Text/Photo(Print)], [Text/Photo(Photo)], etc.).

Use the on-screen keypad or Keypad of the Control panel to enter the setting value.

Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].

[Adj. Range:-3~+3]

Default: +0