[2-Hole Punch]
Overview
Set the punch positions for [2-Hole Punch].
NOTICE
- Do not punch special paper such as label paper or tracing paper. Punching special paper may cause unexpected machine problems.
Tips
- When loading paper, push paper against the paper tray so that there is no gap between the paper and the Side guides of the paper tray. Not doing so causes a misalignment of punch holes.
- If ATS (automatic tray switch) functions while the punching operation is in progress, the punched holes may shift.
- The punch function is not available for paper ([Custom] and [Tab Paper]) other than [Standard].
Specifications
Category | Print Workflow, Copy / Scan | ||
Location | Machine | Touch Panel, Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | This function requires one of the following optional devices. Finisher FS-532 with Punch Unit PK-525 mounted Finisher FS-532 with Z Folding Unit ZU-608 mounted | ||
Required items | - | ||
Setting items | [Left] | Punches 2 holes in the left side of paper.  | |
[Right] | Punches 2 holes in the right side of paper.  | ||
[Top] | Punches 2 holes in the top of paper.  | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [COPY] - [Output Setting] - [Punch] | ||
Control panel - Utility/Counter - [User Setting] - [Initial Setting] - [Copy Initial Setting] - [Output Setting] - [Punch] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.