User's Guide

> COPY > [COPY] > What Is the [COPY]?

What Is the [COPY]?

Overview
Basic Copy Operation

Overview

Copy is a function for copying an original with this system.

This function allows you to configure original, paper, image quality, and finishing settings. You can also use convenient functions such as 2-sided copy, Enlarge/Reduce, Booklet, Fold, and Black and White copy. Scanning the original with these settings enhances copy quality and operation efficiency, enabling you to make copies depending on the desired finishing.

Also, using the ADF allows you to scan more originals in a short time, or automatically scan a 2-sided original.

Basic Copy Operation

1
Position the original.
2
Press [COPY].
3
Set the copy conditions.

[Original Setting]: Sets conditions for the original. Configure settings for the original such as the orientation, image quality, and 2-sided original. For details, refer to [Original Setting].

[Quality Adj.]: Sets image quality conditions. Set the copy density, contrast, and more. For details, refer to [Quality Adj.].

[Zoom]: Sets the copy zoom ratio. For details, refer to [Zoom].

[Simplex/Duplex]: Select the combination of 1-sided and 2-sided modes for the original and copy. For details, refer to [Simplex/Duplex].

[Application]: Sets application functions. Configure various settings such as erasing the outside of an original or adding a stamp. For details, refer to [Application].

[Output Setting]: Sets the output location and post-processing functions. Set finishing such as punching or folding. For details, refer to [Output Setting].

[Store Setting]: Configures the setting to store the copied original as data in this system. For details, refer to [Store Setting].

[Paper]: Select a paper tray to use for copying. For details, refer to [Paper].

4
Enter the number of sets using the Keypad of the Control panel.
5
Press Start on the Control panel.

Copying starts.

When dividing the original into multiple parts for scanning, press [Separate Scan], and press Start each time the original is replaced. After scanning is completed, press [Separate Scan] again.

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.