[Select Chart Type (Auto Image Adj.)]
Overview
Select the chart type when automatically adjusting the image quality for each paper weight.
Specifications
Category | Device Management | ||
Location | Machine | Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | Intelligent Quality Optimizer IQ-501 and Video Interface Kit VI-514 | ||
Required items | - | ||
Setting items | [Change] | Selects the chart type when automatically adjusting the image quality. | |
Remarks | - | ||
Reference | - | ||
Screen access | Control panel - Utility/Counter - [User Setting] - [Common Setting] - [Select Chart Type (Auto Image Adj.)] | ||
Control panel - Utility/Counter - [Administrator Setting] - [Common Setting] - [Select Chart Type (Auto Image Adj.)] | |||
Procedure
1
Press [Change].
2
Select the chart type used for each weight.
Each time [Change Unit] is pressed, the weight display unit is switched.
The crop mark printing position and length vary for each type.
(Default: 135 g/m2 or less: Type1, 136 g/m2 or more: Type2)
Other than banner paper (487.7 mm or less in paper feed direction) | Type1 | Type2 | Type3 | |
|---|---|---|---|---|
Distance from paper edge to crop mark | Paper feed direction | 2.0 mm | 9.0 mm | 4.0 mm |
Crosswise direction | 2.0 mm | 2.0 mm | 2.0 mm | |
Crop mark length | Width | 5.0 mm | 5.0 mm | 5.0 mm |
Height | 6.0 mm | 6.0 mm | 6.0 mm | |
Banner paper (487.8 mm or more in paper feed direction) | Type1 | Type2 | Type3 | |
|---|---|---|---|---|
Distance from paper edge to crop mark | Paper feed direction | 2.5 mm | 9.0 mm | 4.0 mm |
Crosswise direction | 2.5 mm | 2.5 mm | 2.5 mm | |
Crop mark length | Width | 4.5 mm | 4.5 mm | 4.5 mm |
Height | 5.5 mm | 5.5 mm | 5.5 mm | |
3
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.