[Dryness Preparation]
Overview
Set the dryness preparation operation of the dehumidify fan heater to prevent paper jams.
Prints cannot be made from the paper tray undergoing dryness preparation.
Tips
- Just after paper was loaded or when the outside humidity changes, the humidity in the paper tray being dehumidified changes, which may lead to coated paper becoming stuck. Performing dryness preparation stirs warm air for the specified period of time using the dehumidify fan heater and the optional paper feed fan, and forcibly dehumidifies the inside of the paper tray and paper.
Specifications
Category | Print Workflow | ||
Location | Machine | Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | This function requires one of the following optional devices. Large Capacity Unit LU-202m or Large Capacity Unit LU-202XLm with Dehumidifier Heater HT-503 mounted Paper Feeder Unit PF-602m with Dehumidifier Heater HT-504 or Dehumidifier Heater HT-505 mounted Paper Feed Unit PF-707m with Dehumidifier Heater HT-506 mounted | ||
Required items | - | ||
Setting items | -[ON] | Always performs dryness preparation using the dehumidify fan heater after opening or closing the paper tray. | |
[OFF] | Does not perform dryness preparation using the dehumidify fan heater if the remaining amount of paper is not changed after the paper tray is opened or closed. | ||
Remarks | -: Default | ||
Reference | - | ||
Screen access | Control panel - Utility/Counter - [User Setting] - [System Setting] - [Paper Tray Setting] - [Dehumidify Fan Heater] | ||
in the upper-right of a page, it turns into 
and is registered as a bookmark.