[TCP Socket Setting]
Overview
Configure the setting to communicate with the Image Controller using TCP Socket.
Configure this setting when using the communication function with the TWAIN driver or using the Flash Player function such as tray information in Web Connection.
Enabling [TCP Socket(ASCII Mode)] enables you to display Web Connection in the flash format.
Tips
- The Image Controller is required to use this function. For details, refer to What Is Web Connection (Image Controller).
NOTICE
- If you have changed the setting, turn the machine off and back on again.
Tips
The following setting is required to enable [Use SSL/TLS].
- Register the certificate of the Image Controller.
- Set SSL communication.
Reference
- For details on the certificate, refer to What Is the Certificate?.
- For details about SSL communication, refer to [SSL Setting].
Specifications
Category | Network / Security | ||
Location | Machine | - | |
Printer driver | - | ||
Application | Web Connection | ||
Required options | - | ||
Required items | - | ||
Setting items | [TCP Socket] | Uses the communication function (TCP Socket) using the TWAIN driver. To set [Port Number], select this check box. | |
[Port Number] | Sets the port to establish a communication using the TWAIN driver. Range: 1 to 65535 Default: 59158 | ||
[Use SSL/TLS] | Uses SSL to establish a communication using the TWAIN driver. To set [Port No.(SSL/TLS)], select this check box. | ||
[Port No.(SSL/TLS)] | Sets the port number for SSL/TLS communication. Range: 1 to 65535 Default: 59159 | ||
[TCP Socket(ASCII Mode)] | Uses TCP Socket (ASCII Mode). To set [Port No.(ASCII Mode)], select this check box. | ||
[Port No.(ASCII Mode)] | Sets the port number of TCP Socket (ASCII Mode). Range: 1 to 65535 Default: 59160 | ||
[OK] | Applies the setting. | ||
[Cancel] | Cancels the setting. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Web Connection - [Network] - [TCP Socket Setting] | ||
in the upper-right of a page, it turns into 
and is registered as a bookmark.