User's Guide

> Control Panel (Hard keys) > Control panel of Post inserter > What Is the Post inserter?

What Is the Post inserter?

The Post inserter is 1 of the optional devices that is used in this system.

The Post inserter, which is mounted on the finisher, allows you to perform post-processing (Corner Staple, 2 Position Staple, Fold & Staple, Fold, or Punch) for printed sheets.

Even if post-processing is required after printing, you do not need to perform reprinting.

On the Post inserter control panel of PostInserter PI-502, the following post-processing can be performed depending on the combination with the optional device mounted in the finisher.

PostInserter PI-502

Output (Finishing)

Mode selection key

 

Corner Staple

2 Position Staple

Fold & Staple

Tri-Fold

Punch key

2-Hole Punch

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.