[Process Speed Setting]
Overview
Set [Process Speed Setting].
Set the transport speed according to the paper type and basis weight.
Normally set to [Default]. If a paper jam or double feed occurs, change the speed and make adjustments.
Tips
This item cannot be selected when the following settings are configured:
- [Blank Insert] is set in [Paper Type].
- The weight of [75-80g/m2] or more is set in [Weight].
Specifications
Category | Print Workflow, Copy / Scan, Adjustment / Maintenance | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | -[Default] | Transports the paper at the default speed. | |
[High Speed] | Transports the paper at high speed. | ||
[Low Speed] | Transports the paper at low speed. | ||
Remarks | -: Default | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Paper Setting] - [Change Set] - [Expert Adj.] | ||
Touch panel - [MACHINE] - [Paper Setting] - [New Setting] - [Expert Adj.] | |||
Touch panel - [MACHINE] - [Reg./Del.PaperSet.] - [Add/Edit] - [Paper Type] - [Expert Adj.] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.