[Offset Lead Edge2(Front)]
Overview
Set [Offset Lead Edge2(Front)].
Set the adjustment range when one of the following phenomena occurs on the front side of the paper.
- Paper jam (Jam code: J-2101): Enter the positive value.
- Paper jam (Jam code: J-3102): Enter the negative value.
NOTICE
- The following settings are required to use this function.
- Select [Lead Edge Image] in [Expert Adj.] - [Lead Edge Transfer Set.].
NOTICE
- If [Offset Lead Edge2(Front)] is specified, also set [Offset Lead Edge1(Front)] to the same numeric value.
NOTICE
- A separation failure (drum section and belt section) may degenerate if an adjustment is made. In addition, the following phenomena may occur.
- Transfer repelling
- Density reduction of printed images due to insufficient transfer
Specifications
Category | Print Workflow, Copy / Scan, Adjustment / Maintenance | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | Entry field | Use the on-screen keypad to set the value. | |
Keypad | Used to enter numeric values. Press [+ / -], and set the sign of the numeric value. Range: -128 to +127 | ||
[Reset] | Returns all the entered numeric values to "0". | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Paper Setting] - [Change Set] - [Expert Adj.] | ||
Touch panel - [MACHINE] - [Paper Setting] - [New Setting] - [Expert Adj.] | |||
Touch panel - [MACHINE] - [Reg./Del.PaperSet.] - [Add/Edit] - [Paper Type] - [Expert Adj.] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.