[CUT SETTING]
Overview
Arbitrarily set the finishing size for cutting, the cut positions at the leading edge and rear edge, and the cut width. The numeric values at the trailing edge and front edge are calculated automatically.
When attaching creases, also set their positions.
a: [Finished Size(Height)]
b: [Finished Size(Width)]
c: [Leading Edge]
d: [Rear Edge]
e: [Cut Width(crosswise)]
f: [Cut Width(lengthwise)]
g: Crease position
Tips
- Enter the numeric value, referring to [Permitted range]. For details about how to change [Permitted range], contact your service representative.
Specifications
Category | Device Management, Print Workflow, Copy / Scan | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | Web Connection, Web Utilities | ||
Required options | All the following optional devices are required. Trimmer Unit TU-510 Trimmer Unit TU-504 Creaser Unit CR-102 | ||
Required items | - | ||
Setting items | [Finished Size(Height)] | Sets the height and width of the finishing size. Set the value to 85 mm / 3.346" or more. Unit: 0.1 mm / 0.004" | |
[Finished Size(Width)] | Sets the width of the finishing size. Set the value to 133 mm / 5.236" or more. Unit: 0.1 mm / 0.004" | ||
[Leading Edge] | Sets the cut position at the leading edge using the value from the lead edge of paper. Set the value in the range of 10 mm to 13 mm / 0.394" to 0.512", and also set the cutting amount at the trailing edge in the range of 10 mm to 13 mm / 0.394" to 0.512". Unit: 0.1 mm / 0.004" | ||
[Trailing Edge] | The trailing edge position is automatically calculated from the paper size (widthwise), finishing size (width), leading edge position, and gutter slit width (vertical direction). Trailing edge position = Paper size (widthwise) - Finishing size (width) - Leading edge position - Gutter slit width (vertical direction) | ||
[Rear Edge] | Sets the cut position at the rear edge using the value from the upper edge of paper. Set the value in the range of 8.0 mm to 26.0 mm / 0.315" to 1.024", and also set the difference between the rear and front edge positions in the range of 10 mm / 0.394". Unit: 0.1 mm / 0.004" | ||
[Front Edge] | The front edge position is automatically calculated from the paper size (lengthwise), finishing size (height), rear edge position, and gutter slit width (horizontal direction). Front edge position = Paper size (lengthwise) - Finishing size (height and width) - Rear edge position - Gutter slit width (horizontal direction) | ||
Crease position | Sets the crease position. Up to 5 creases can be set. Leave a space of 10 mm / 0.394" or more from the leading or trailing edge, and set the crease interval to 1.0 mm / 0.04" or more. When 2 pages are imposed by cutting in the horizontal direction, up to 2 creases can be specified. When 3 pages are imposed by cutting in the horizontal direction, only 1 crease can be specified. Unit: 0.1 mm / 0.004" | ||
[Cut Width(crosswise)] | Sets the cut width of the horizontal direction. Fixed to 8.0 mm / 0.315". | ||
[Cut Width(lengthwise)] | Sets the cut width of the vertical direction. Set the value in the range of 0 mm / 0" or 5 mm to 13 mm / 0.197" to 0.512". Unit: 0.1 mm / 0.004" | ||
[Disabled] | Clear this check box to set a crease position or [Cut Width(lengthwise)]. | ||
[Complete] | Creates a trimmer profile with the specified value. | ||
[Cancel] | Cancels the setting, and returns to the previous screen. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Trimmer Profile] - [Create] - Select [1x1-3x3 Cutting(CR)]. - [OK] | ||
Touch panel - [MACHINE] - [Trimmer Profile] - Select a trimmer profile of [1x1-3x3 Cutting(CR)]. - [Edit] | |||
Web Connection - Login screen - [Finisher Manager] - [TU-510 Profile Manager] - [Create] - Select [1x1-3x3 Cutting(CR)]. - [OK] | |||
Web Connection - Login screen - [Finisher Manager] - [TU-510 Profile Manager] - Select a trimmer profile of [1x1-3x3 Cutting(CR)]. - [Edit] | |||
Web Utilities - [Finisher Manager] - [TU-510 Profile Manager] - [Create] - Select [1x1-3x3 Cutting(CR)]. - [OK] | |||
Web Utilities - [Finisher Manager] - [TU-510 Profile Manager] - Select a trimmer profile of [1x1-3x3 Cutting(CR)]. - [Edit] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.