Effectively Using Useful Paper-Related Settings
Automatic Tray Switching Function
Setting the Auto Tray Switch (ATS) means printing does not need to stop when a paper tray runs out of paper, helping prevent drops in productivity.
The setting procedure is detailed below.
Step 1
Configure whether or not to use the function
Select the Paper tray which is switched when the Auto Tray Switch (ATS) is activated.
Step 2
Set the priority order at which each Paper tray is switched.
Uses the Paper tray with the highest priority when the Auto Tray Switch (ATS) is activated.
[Simple Setting]
[Simple Setting] is a function to automatically set various items of [Expert Adj.] that corresponds to the symptomatic improvement by just selecting the preset table applicable to the symptoms such as abnormality or trouble.
Specific adjustments can be made to the following items.
- Paper jams
- Improving cloudy images and image blur on prints
Example of [Simple Setting] Adjustment Items
Adjustment Item | Target Tools | Description |
|---|---|---|
[Transfer-Fuser JAM(1st)] | Touch panel | This function is effective for paper jams that may occur when you print the front side of thin paper. |
[Cloudy Image(1st)] | Touch panel | This function is effective for cloudy image and image blur on the whole image printed on the front side. |
Reference
- For details about [Simple Setting], refer to What Is the [Simple Setting]?.
[Expert Adj.]
Adjusting the [Expert Adj.] items allows you to deal with various situations or finishing conditions.
The following features are available as adjustment items.
- Improving errors that occur during the transfer, separation, and fusing processes
- Other advanced adjustments
Tips
- The selectable items vary depending on the optional devices mounted on this system.
Reference
- For details about [Expert Adj.], refer to What Is the [Expert Adj.]?.
in the upper-right of a page, it turns into 
and is registered as a bookmark.