User's Guide

Bookmarks

> Controller > [Direct Print Setting] - [Basic Settings] > [Punch] > [Punch]

[Punch]

Overview

Set the default number of punch holes for direct printing.

You can carry out your work more efficiently by setting the default finishing.

Tips

The selectable items vary depending on the optional devices mounted on this system or the country or region in which this system is used.

Specifications

Category		Print Workflow
Location	Machine	Touch panel
	Printer driver	-
	Application	-
Required options		This function requires one of the following optional devices. Finisher FS-532 with Punch Unit PK-525 mounted Finisher FS-532 with Z Folding Unit ZU-608 mounted
Required items		-
Setting items		-[Off]	Does not punch.
		[2-Hole]	Sets the number of punch holes. Performs punching to suit the setting of [Binding Position].
		[3-Hole]
		[4-Hole]
		[Multi Punch]
		[Double Multi Punch]
		[Cancel]	Moves to the previous screen without saving the settings.
		[OK]	Saves the settings and moves to the previous screen.
Remarks		-: Default
Reference		-
Screen access		Touch panel - [MACHINE] - [Controller] - [Direct Print Setting] - [Basic Settings] - [Punch]

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.