[USB]
Overview
Send scan data to the USB flash drive.
Connect the USB flash drive to the USB port of this system.
Specifications
Category | Copy / Scan | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | [USB Flash Drive] | Select USB Flash Drive. A USB flash drive cannot be selected unless it is connected to the port. | |
[Clear All] | Resets the selected destination. When multiple destinations are selected using certain sending methods, they can be canceled collectively. | ||
[Scan Settings] | Saves the selected destination, and sets scanning conditions. For details, refer to [Scan Settings]. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [SCAN] - [USB] | ||
Procedure
1
Press [USB].
2
Connect the USB flash drive to the USB port of this system.
3
Select [USB Flash Drive] in the destination list.
The selected destination is displayed in [List] of the left pane of the screen.
To cancel the selected destination, press the selected registration name again.
4
Press [Scan Settings], and set scanning conditions.
For details about the scan conditions, refer to [Scan Settings].
5
Load the original, and press Start on the Control panel.
Scanning starts, and the scan data is sent to the selected destination.
in the upper-right of a page, it turns into 
and is registered as a bookmark.