[Print Pos. Setting]
Overview
Set the stamp printing position.
[Outside Print] can also be set to print the stamp outside the text for spread printing.
Specifications
Category | Copy / Scan | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | [Upper Left] | Selects the print position. | |
[Mid Left] | |||
[Lower Left] | |||
[Upper Mid] | |||
[Mid] | |||
[Lower Mid] | |||
[Upper Right] | |||
[Mid Right] | |||
[Lower Right] | |||
[Fine Adjustment] | Used to enter numeric values to adjust the print position. | ||
[Outside Print] | Prints the stamp outside the spread area. This setting is available when [Booklet] or [Adhesive Binding] is selected. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [COPY] - [Application] - [Stamp] - [Set Numbering] ([Preset Stamp]) | ||
Touch panel - [COPY] - [Application] - [Stamp] - [Page No.] | |||
Touch panel - [COPY] - [Application] - [Stamp] - [Date/Time] | |||
Procedure
Fine-adjust the stamp printing position.
1
Press [Fine Adjustment].
The setting screen is displayed.
2
Select the key of the desired direction.
The entry field is displayed.
3
Use the on-screen keypad to enter the numeric value.
Pressing [,]/[+] increases or decreases the numeric value in increments of 1 mm.
Range: 0 mm to 50 mm (at the top, bottom, left, and right)
4
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.