Periodical Both Sides Adjustment

Intelligent Quality Optimizer IQ-501 is equipped with a [Periodical Both Sides Adj.] function which automatically adjusts [Both Sides] on a regular basis.

With [Periodical Both Sides Adj.], [Both Sides] are adjusted every time a certain number of copies are printed.

A chart like the one below is output. Scan it with Intelligent Quality Optimizer IQ-501 and correct any deviation of image position.

The job automatically resumes when the adjustments are complete, so there is no need to operate the job manually. The chart used for the adjustment is output to a different tray than the one being used for the job.

The adjustment results are reflected after a dozen or so sheets are output after the chart is output.

For details about the settings procedure for [Periodical Both Sides Adj.], refer to the page below.

[Period. Both Sides Auto Adj.]

The values that are recognized as spacing or deviation when performing adjustments can be changed according to the machine environment, etc.

For details about the settings procedure and settings items, refer to the page below.

[Adjustment Interval]

[Deviation Check]

Tips

• Make a marking on the chart so that you know which paper feed tray it was printed from.
  For details on how to read the various markings, refer to About Charts.

Tips

• You can also set whether or not [Periodical Both Sides Adj.] is implemented for each [Paper Profile].
  For details about the settings, refer to [All Paper Profiles].