When to Perform Maintenance/Adjustment
Table of Timings
Maintenance and adjustments such as those detailed below should be performed periodically to maintain print quality.
Item | Every Day | Once every 2 to 3 months | User Discretion | After Executing Job | |||||
|---|---|---|---|---|---|---|---|---|---|
Before Power ON | After Power ON | Using a New Paper Type | After Changing the Paper Loaded into the Tray | Before the job | After Outputting 1,000 to 2,000 Copies | When Changing the Screen | When Adjusting the Finish | ||
Day to Day Maintenance | - | ||||||||
Image Position Adjustment | - | - | - | - | - | ||||
Image Quality Adjustment | - | - | - | -* | - | - | |||
*Adjustments are performed automatically if Relay Unit RU-518m is mounted, in which case no action needs to be taken.
Perform Every Day
Before powering on
After powering on
Perform Every 2 to 3 Months
Perform once every 2 to 3 months on a regular basis.
Other, Perform at User Discretion
When using a new type of paper
When you have changed the paper in the tray
Before the job
When outputting 1,000 to 2,000 copies
When changing the screen
Perform When Finishing Adjustments Are Required After Executing a Job
Make the adjustments while referring to the print result.
in the upper-right of a page, it turns into 
and is registered as a bookmark.