Web Connection
Q. What Should I Do to Log In to Web Connection?
A. Enter the IP address of this system or Image Controller mounted on this system in the URL field of the browser, and press [Enter].
For details about how to access Web Connection, refer to the following:
Tips
For details about how to confirm the IP address, refer to the following.
- IP address of this system: [Network Setting]
- IP address of Image Controller mounted on this system: [TCP/IP Setting]
Q. When Will I Lose Access to Web Connection?
A. If the following setting is configured, Web Connection is not available. To use it, contact this system's administrator.
- For machine
- Enhanced security mode is enabled.
- [Web Connection Setting] is set to [OFF] in [Network Setting].
- [Web Connection Setting] is set to [Disable] in [Quick Security Setting].
- The browser installed in the Touch panel is used.
- For Image Controller
- [Web Connection Setting] is set to [Disable] in [Administrator Setting] - [Controller] - [Simple Security Setting].
Tips
Even if [Quick IP Filtering] is set, you may not be able to access Web Connection.
- Setting [Quick IP Filtering] to [No Filtering] may allow you access. Check for security issues before changing settings.
- For details about [Quick IP Filtering] settings for the machine, refer to [Quick IP Filtering].
- For details about [Quick IP Filtering] settings for the Image Controller, refer to [Simple IP Filtering].
Q. What Is the Password of the Web Connection Administrator Mode?
A. For details about the default administrator password, refer to [About the Administrator Password].
If you cannot log in using the default password, contact this system's administrator.
in the upper-right of a page, it turns into 
and is registered as a bookmark.