[Filtering Method]
Overview
Select a filtering method.
The allowable range of the IP addresses or subnet varies depending on the selected filtering method. Select the appropriate method to suit the operating environment of the Image Controller.
The figure below shows an example when [Sync. IP Address] is selected.
Tips
- The Image Controller is required to use this function. For details, refer to [Controller] (Administrator Setting).
Specifications
Category | Network / Security | ||
Location | Machine | Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | [No Filtering] | Disables IP filtering. | |
[Sync. IP Address] | Allows accesses of only the IP addresses in the specified range in IPv4 environment. The subnet mask is fixed to 255.255.255.0. Allows accesses of only the IP address set to the Image Controller and the IP addresses of which the high-order 64 bits are the same in the IPv6 environment. | ||
-[Sync. Subnet Mask] | Allows accesses of only the IP address set to the Image Controller and the IP addresses included in the same sub network. | ||
Remarks | -: Default | ||
Reference | - | ||
Screen access | Control panel - Utility/Counter - [Administrator Setting] - [Controller] - [Simple Security Setting] - [Simple IP Filtering] | ||
in the upper-right of a page, it turns into 
and is registered as a bookmark.