[MACHINE] Screen Layout
Overview
To display the [MACHINE] screen, press [MACHINE].
This area displays the status of the running system or the mounted optional devices in a visual and easy-to-understand way, enabling you to grasp the status of this system in real time.
You can configure various settings using keys at the bottom of the screen. Keys such as [Paper Setting] and [Both Sides] are generically referred to as "machine function keys".
Tips
- You can change the order of the machine function keys according to your preferences. For details, refer to [Machine Function Key Setting].
Tips
The displayed contents vary depending on models or optional devices mounted on this system. This section mainly describes the screens that are displayed when the following optional devices are mounted.
- Finisher FS-532
- Z Folding Unit ZU-608
Screen and Description
Key name/area name | Description |
|---|---|
[MACHINE] | Displays the [MACHINE] screen. Displays the system status or the mounted optional devices in a visual and easy-to-understand way. |
Information display area | Reports the required operation depending on the system status or conditions. |
[Main Body] warm-up status bar | Indicates the warm-up progress while this system is in warm-up mode. When the warm-up operation is completed, the status bar disappears. |
[Orig. Count] | Displays the count of printed originals. |
[Reserve Job] | Displays the number of reserved jobs. |
[Memory] | Indicates the amount of available space on the HDD memory in "%" form. The unit of this value can be changed to "GB". |
[File Amount] | Indicates the amount of available space in the file system in "%" form. |
Scanner message | Displays the scan status of the original. |
Allows you to output a sample at any time when printing, and check the quality of printouts in real time. | |
Displays the status of the job sent to this system in real time. | |
Allows you to check the following statuses. Toner status Replacement of the Waste toner box Staple supply to the mounted optional device Scrap disposal Water replenishment in humidifier tank | |
Displays setting information such as the paper size, paper orientation, and paper name for each paper tray. | |
Machine function key display switch * / ) | Switches the display of the machine function keys. |
Used to specify paper conditions for the paper tray. The specified conditions can be registered as a paper profile. | |
Corrects misalignment of printing positions on the front and back sides. | |
Adjusts colors or finishing of printouts. | |
Configures the settings related to Image Controller. | |
Configures settings for curl adjustment by Relay Unit RU-518m. | |
Displays the User's Guide on the Touch panel. | |
Adds, edits, or deletes a paper profile. | |
Measures target paper using Intelligent Media Sensor IM-101, and sets the appropriate paper when the type or weight of the paper loaded in a paper tray is not known. | |
Used to specify sample printing conditions. You can check an output sample at the specified timing. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.