Restricting the Secondary Copy of Copied Paper

To print a concealed security watermark on printed paper ([Copy Protect])

To display:

[Copy]
- [Application]
  - [Copy Security]
    - [Copy Protect]

Text such as "Copy" and "Private" are printed in the background pattern as concealed text.

Settings	Description
[ON]/[OFF]	Select [ON] to print the copy protection text.
[Copy Protect Type]	Select a stamp used. The date and time can also be printed. [Preset Stamp]: Select a preset stamp to be printed. [Registered Stamp]: Select a registered stamp to be printed. [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper. [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.
[Stamp Selection]	The registration status of the stamp is displayed.
[Detail Setting]	Select the color, density, size, and pattern overwriting of print characters if necessary.
[Copy Protect]	Select how to print the copy protect pattern. Also, you can set the pattern contrast if necessary.
[Background Pattern]	Select a background pattern.
[Change/Delete Position]	Allows the stamp position settings to be checked, changed or deleted, if necessary. You can change the stamp sequence and insert a space between stamps. When you select up to four stamps, you can change their angle (within +/-45 degrees).

To print stamps such as "Copy" and "Private" on the entire page ([Stamp Repeat])

To display:

[Copy]
- [Application]
  - [Stamp/Composition]
    - [Stamp Repeat]

Stamp such as "Copy" and "Private" are printed on the entire page.

Settings	Description
[ON]/[OFF]	Select [ON] to repeatedly print a stamp.
[Stamp Repeat Type]	Select a stamp used. The date and time can also be printed. [Preset Stamp]: Select a preset stamp to be printed. [Registered Stamp]: Select a registered stamp to be printed. [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper. [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.
[Stamp Selection]	The registration status of the stamp is displayed.
[Detail Setting]	Select the color, density, size, and pattern overwriting of print characters if necessary.
[Change/Delete Position]	Allows the stamp position settings to be checked, changed or deleted, if necessary. You can change the stamp sequence and insert a space between stamps. When you select up to four stamps, you can change their angle (within +/-45 degrees).

You can print multiple stamps, such as registered stamp, preset stamp, date/time, job number, and serial number, at a time. However, the number of stamps that can be printed may be limited depending on the type and angle of the selected stamps.

To embed copy restriction information in the copy protection function that prints concealed security watermarks in the background ([Copy Guard])

To display:

[Copy]
- [Application]
  - [Copy Security]
    - [Copy Guard]

Copy Guard is a copy protection function that prints concealed security watermarks such as "Private" or a date in the background to prevent unauthorized copying, and embeds a copy restriction pattern on all printed sheets.

Settings	Description
[ON]/[OFF]	Select [ON] to embed a copy guard pattern.
[Stamp Text]	Select a stamp used. The date and time can also be printed. [Preset Stamp]: Select a preset stamp to be printed. [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper. [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.
[Stamp Selection]	The registration status of the stamp is displayed.
[Detail Setting]	If necessary, select the print size and text color.
[Copy Guard]	Specify the contract of copy guard pattern if necessary.
[Background Pattern]	Select a background pattern.

You can use the Copy Guard function when the optional Security Kit is installed and the Copy Guard function is enabled on this machine. For details on how to enable the Copy Guard function, refer to Here.
The Copy Guard function does not support color paper, envelopes and transparencies.

To embed a password in the copy protection function that prints concealed security watermarks in the background ([Password Copy])

To display:

[Copy]
- [Application]
  - [Copy Security]
    - [Password Copy]

Copy Guard is a copy protection function that prints concealed security watermarks such as "Private" or a date in the background to prevent unauthorized copying, and embeds a password for the password copy function on all printed sheets.

Settings		Description
[ON]/[OFF]		Select [ON] to embed a password.
[Password]		Enter the password to restrict copying.
[Stamp Setting]		Set a stamp to be printed on each paper.
	[Stamp Text]	Select a stamp used. The date and time can also be printed. [Preset Stamp]: Select a preset stamp to be printed. [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper. [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.
	[Stamp Selection]	The registration status of the stamp is displayed.
	[Detail Setting]	If necessary, select the print size and text color.
	[Password Copy]	Specify the contract of password copy guard pattern if necessary.
	[Background Pattern]	Select a background pattern.

You can use the Password Copy function when the optional Security Kit is installed and the Password Copy function is enabled on this machine. For details on how to enable the Password Copy function, refer to Here.
The Password Copy function does not support color paper, envelopes and transparencies.